Cleaning Instructions Unfinished Leather

Do following 2 to 6 times a year according to use and soiling

  1. Spray the cleaning mixture onto a damp cloth, wipe the leather gently. Do not concetrate on stained areas. Best to do smaller areas like one cushion at a time. (mixture is 1 (one) ounce of cleaner in a 750 m +/- spray bottle) wipe dry with a cloth.
  2. Wipe the leather with a damp cloth, wipe dry.
  3. Apply a layer of conditioner over the entire surface allow to penetrate. Sometimes applying a second coat after 10 minutes will help bring back the colour faster. If needed buff dry. If after a few hours the leather still feels sticky you can wipe with a damp cloth or allow to dry further. If this is occuring you may need to apply less conditioner

To protect or restore your leather you can:

No cleaning required just apply a light coat of conditioner allow to penetrate 10 to 30 minutes and buff dry if needed. This can be done as often as needed.

If you are trying to get out a bad stain or there is an area that has faded and they are not responding that quickly to the conditioning you can try applying a second layer of conditioner before the first drys. Gently massaging in the conditioner may help it penetrate and lift the stain and\or pull the dyes to the surface with some really badly stained areas especially with oils you can apply a liberal coating of conditioner massage and after 10 minutes or so wipe the area with a cloth that is wet with conditioner. This sometimes also works on faded areas